• Frequency-controlled vibration control

  • 3A AC and 6A AC load current

  • Working with 110V AC / 220V AC load voltage

  • Adjustable vibration frequency between 30Hz and 140Hz

  • Adjustable set point with thumbwheel, digital or analog input

  • Stopping the load output with digital input and/or "OUT OFF/ON" key

  • Selectable digital input (for NO/NC contact)

  • Solenoid valve output controlled by digital input (Optional, 24V DC/250mA)

  • Power cable with plug

  • Connection cables for vibration coil output and solenoid valve output

  • Plug-in connection for digital input and analog input

  • Maximum and minimum value can be assigned to output

  • Internal fuse

  • Soft Start and Soft Stop feature

  • On/Off Power switch

  • CE marked according to European Norms


Supply90-250V AC, 50/60Hz, 1000VA for EFVC-03-xx, 90-250V AC, 50/60Hz, 2000VA for EFVC-06-xx
DimensionsG80xY175xD90 mm for EFVC-03-xx, G115xY175xD160mm for EFVC-06-xx
WeightApprox. 1500 grams for EFVC-03-xx (in packaging), approx. 2500 grams (in packaging) for EFVC-06-xx
Insulation Voltage2500Vrms 1 minute between input and output terminals
External ConnectionsPlug cable, cable and connector with socket
Product Standard EMC/LVDTS EN 61326-1 2013 / TS EN 61010-1 2012 (Pollution degree 2, overvoltage category II)
Mounting TypeWall mounting
Enclosure MaterialSelf extinguishing plastics (V-0 according to EN 60695-11-10 standard)
Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...60 ºC (There should be no icing or condensation in the environment.)
Relative Humidity50% at 40 °C, increasing as the temperature decreases to 80% at 31 °C (no condensation)
HeightMax. 2000m
Protection DegreeAccording to EN 60529 IP20
Digital InputLoad output can be stopped with NO/NC contact or NO/NC sensor that can be selected from the program and solenoid valve output is activated. It can be used with +12V DC (Maximum 30mA) voltage output on the device or with external 10-30V DC voltage.
Analog Input0-10V DC
Vibration Coil Output (Current(Arms))3A AC for EFVC-03-xx, 6A AC for EFVC-06-xx
Vibration Coil Output (Voltage(Vrms))0-110V AC (for mains voltage 110V AC) or 0-220V AC (for mains voltage 220V AC)
Vibration Coil Output (Frequency(Hz))30 Hz ile 140 Hz arasında ayarlanabilir
Solenoid Valve Output24V DC, 250mA (if digital input is active, output given)
Control TypeManual vibration control is carried out.
Vibration Amplitude AdjustmentAdjustable by adjusting thumbwheel or 0-10V DC analog signal input
Please choose your preferred language.
Switch to English