EDP7041
  • 4 digits display

  • Easy to use by front panel keypad

  • Communication via RS-485 Modbus protocol or synchronous running between two or more potentiometers

  • Preset value can be adjusted from external buttons

  • Display scale can be adjusted between -1999 and 9999

  • Decimal point can be adjusted between 1. and 3. digits

  • 0-10V, 0-20 mA and 4-20mA output with adjustable min. and max. values

  • Soft on and soft off properties can be selected

  • Parameter access protection on 3 levels

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0 ...50 ºC / -25...70 ºC
Relative Humidity80% Relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +10% -20% or 24V AC ±10%, 50/60Hz or 9-30V DC / 7-24V AC ±10% SMPS
Power Consumption7VA
External ConnectionsScrew-terminals
Input
Upwards Input(UP)Contact input or max. 24VDC logic input (active low)
Downwards Input(DOWN)Contact input or max. 24VDC logic input (active low)
Output
0-10V OutputDigitally adjusted max. 10mA, max. 10V potentiometer output
Accuracy: 0.1% Resolution: 1mV
Fluctuation: Max. 30mV
Rise time from 0 to 10V is max. 300ms
0-20mA OutputDigitally adjusted max. 12V, max.20 mA potentiometer output
Accuracy: 0.1% Resolution: 2µA"
Fluctuation: Max. 60µA
Rise time from 0 to 20mA is max. 300ms
4-20mA OutputDigitally adjusted max. 12V, max.20 mA potentiometer output
Accuracy: 0.1% Resolution: 2µA
Fluctuation: Max. 60µA
Rise time from 4 to 20mA is max. 300ms"
Housing
Mounting MethodPanel mounting
DimensionsW72xH72xD97 mm
WeightApprox. 230g (after packaging)
Enclosure MaterialSelf extinguishing plastics