Cuvia LED is a luminaire that meets today’s and future technology needs for modern and efficient outdoor lighting solutions. With its long lifespan, maintenance-free structure, and low energy consumption, it offers energy-efficient illumination. Its easy installation increases the economic efficiency of the system. The system consists of the Trilux Cuvia luminaire, HSW Stadtfeld solar panel, pole mounting adapter, and battery pack. The luminaire is equipped with an integrated passive infrared (PIR) motion sensor. Lighting and battery management — such as burn time, continuous operation with dimming, and motion detection — can be configured via the DIP switch located on the luminaire head. The solar panel provides a sustainable solution with a maximum output of 80 Wp.
| Luminaire Type | |
| Description | Solar Powered LED post-top luminaire |
| Application Areas | Pedestrian zones, Paths in parks and green areas, Residential facilities, Car parks. |
| Mounting Methods | Post-top mounting |
| Optical System | |
| Optics | Multi-Lens Technology, UV and temperature resistant lens system |
| Light Distribution | Symmetrical wide light distribution |
| LED System - Light Source | |
| Light Source | LED technology |
| Luminous Flux | 900lm |
| Connected Load | 9W |
| Luminous Efficiency | Up to 100lm/W |
| Service Life | L80(tq 25 °C) = 100,000h |
| Light Colour | 3000K |
| Colour Rendering Index | Ra > 70 |
| Housing | |
| Housing | Luminaire body of die-cast aluminium, Anthracite, similar to DB 703, Inclination angle of 0° to 10°, can be set in 5° steps |
| Housing Options | 502 mm x 309 mm x 71 mm |
| Accessories | Mounting accessories / MLT IQ Lens accessories |
| Electrical Version | |
| Electrical Version | Battery technology - Lithium iron phosphate (LiFePo4). Nominal voltage 12.8V | Energy 350 Wh |
| Certificates - Standards | |
| Protection Rate | IP66 |
| Safety Class | Class III |
| Impact Resistance | IK09 |
| Certificates | CE |