ATP4
Triggered by supply voltage
Triggering output (OUT1)
Contact output for timing function (OUT2)
6 different timing modes for OUT2 (A, B, C, D, E, F)
6 different timing unit for OUT2 (S, 10S, M, 10M, H, 10H)
8/11 pin octal connector or 7/10 screw-terminal connection
Start, reset and gate inputs for 10 pins screw-terminal or 11 pin octal connector
CE marked according to European Norms
Manuals
| Environmental Conditions | |
| Ambient/Storage Temperature | 0...50 ºC / -25...70 ºC |
| Relative Humidity | 80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C |
| Protection Degree | According to EN 60529 Front panel: IP50, Rear panel: IP20 |
| Height | Max. 2000m |
| Electrical Characteristics | |
| Supply | 90-250V AC, 50/60Hz or 24V AC ±10%, 50/60Hz or 24V DC ±10% |
| Power Consumption | Max. 10VA |
| External Connections | 8/11 pin octal connector or 7/10 pins plug-in terminals |
| Scale | 0-1.2, 0-3, 0-12, 0-30 or 0-60 |
| Reset Time | 0.3s for ATP4-UV, 0.01s for ATP4-LV |
| Accuracy | Max. 0.2% fault depending on supply voltage Max. 5% fault when setting set value Max. 1% fault depending on temperature effect |
| Inputs | |
| Start Input | Switch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms) |
| Reset Input | Switch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms) |
| Gate Input | Switch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms) |
| Outputs | |
| Trigger output OUT1 | Relay: 250V AC, 8A (resistive load), NC |
| Control output OUT2 | Relay: 250V AC, 8A (resistive load), NO+NC |
| Life Expectancy | Mechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load) |
| Control Output State | OUT LED lit when control output is energized and flashes during timer operates |
| Control | |
| Timing Function | A, B, C, D, E, F modes can be selected |
| Timing Unit | second, 10 seconds, minute, 10 minutes, hours and 10 hours on device |
| Housing | |
| Mounting Method | Panel mounting or rail mounting with 8/11 pin octal connector |
| Dimensions | W48xH48xD82 mm |
| Weight | Approx. 100g (after packaging) |
| Enclosure Material | Self extinguishing plastics |