EUP8420
  • Selectable double set point

  • Selectable sensor type

  • Selectable 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV and 0-50mV input

  • Profile control up to 8 steps

  • Programmable AL1 and AL2 outputs for each step

  • Resume operation after power interruption

  • PID control function with accurate self-tuning

  • Digital inputs can be assigned to 3 different feature

  • Function key can be assigned to 3 different feature

  • Soft-Start function

  • Selectable analog, SSR or relay control output

  • Selectable 0-20mA and 4-20mA analog control output

  • C/A2 relay output can be programmable as second alarm or control output

  • A1 relay output can be programmable as PID cooling control or first alarm

  • Selectable heating and cooling control

  • Input offset feature

  • In the case of probe failure periodical running or relay state can be selected

  • Communication via RS-485 ModBus protocol

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply90-250V AC 50/60Hz or 10-30V DC / 8-24V AC
Power Consumption5VA
External ConnectionsPlug-in terminals
ScalePt-100 resistance thermometer -199.9...600.0 °C / -200...600 °C
J (Fe-Const) thermocouple -30.0....600.0 °C / -30....600°C
K (NiCr-Ni) thermocouple -30.0...999.9 °C / -30...1300°C
L (Fe-CuNi) thermocouple -30.0....600.0 °C / -30....600°C
T (Cu-CuNi) thermocouple -30.0...400.0 °C / -30....400°C
S (Pt10Rh-Pt) thermocouple -40...1700 °C
R (Pt13Rh-Pt) thermocouple -40...1700 °C
0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV, 0-50mV inputs -1999...9999 (max. scale range 10000)
AccuracyResistance thermometer 0-20mA, 4-20mA, 0-10V, 2-10V, 0-25mV, 0-50mV inputs: ±0.2% (of full scale) ± 1 digit
Thermocouples: ±0.5% (of full scale) ± 1 digit
Line ResistanceMax. 100ohm for thermocouple, max. 20ohm for 3-wired Pt-100
Output
C/A2 OutputRelay: 250V AC, 2A (for resistive load), NO+NC (selectable as control or Alarm2 output)
A1 OutputRelay: 250V AC, 2A ( for resistive load), NO (selectable as Alarm1 and cooling control output)
ANL/SSR OutputMax. SSR Output: 0-20mA, 4-20mA, 24V 20mA. Max. load resistance: 600ohm (12 bit 0,2% accuracy)
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 300.000 operations (2A at 250V AC, resistive load)
Control
Control TypeSingle set-point and alarm control
Control AlgorithmOn-Off, P, PI, PD, PID (selectable)
A/D Converter14 bit
Sampling Time100ms
Proportional BandAdjustable between 0.0% and 100.0%. If Pb=0.p%, On-Off control is selected
Control PeriodAdjustable between 1 and 125s
HysteresisAdjustable between 1 and 50 °C/F
Output PowerThe ratio of power at a set point can be adjusted between 0% and 100%
Housing
Mounting MethodPanel mounting
DimensionsW48xH96xD87 mm
WeightApprox. 400g (after packaging)
Enclosure MaterialSelf extinguishing plastics
Please choose your preferred language.
Switch to English