ECON-485
USB / RS 485 Converter
Operates without any private setting or external power supply
Provides 2500Vrms isolation between the ports
RS485 - RS422 side is protected against high voltages and electro-static discharge through TVS technology (transient voltage suppressor)
Data transfers continues uninterrupted with TVS technology
The data flow direction detected automatically
Point to point and point to multi point communication is provided
300...921,6kbps support wide communication speeds
LEDs show data flow and indicate that the device is active
Supports all available communication software
Easily connected to all Enda ModBus communicated devices with Plug-and-play feature
Manuals
Downloads
Environmental Conditions
Ambient/Storage Temperature
-40...85 ºC
Relative Humidity
5...95 RH%
Technical Specification
USB
USB 1.1 ve USB 2.0 standartlarına uygun
Standards
For RS-485/422, it is available TIA/EIA standards
USB Signal Inputs
VCC, DATA +, DATA -, GND, FG
RS-485 Signal Outputs
T/R+, T/R-, GND
RS-422 Signal Outputs
TXD+, TXD-, RXD+, RXD-, GND
Working Mode
Asynchronous working, point-to-point or point-to-multipoint 2 wires (half dublex) 4 wires (full dublex)
Direction Control
Data-flow direction is controlled automatically
Transmission Rate
300-921,600bps (Automatically detect the serial port signal rate)
Load Capability
Support point-to-multipoint transmission. (Each converter can connect 32 RS-422 or RS-485 interface equipment)
Transmission Distance
RS 485/422: 1.2km (921,600bps-300bps) USB port için: Max. 5mt
ESD (Electro-Static Discharge)
±15KV
Interface Protection
600W/ms
Interface Form
USB port: A Type male interface RS 485/422 port: 5-pin connection pole
Signal Indication
Power LED display (PWR), receive LED display (RXD), send LED display (TXD)
Transmission Media
Twisted-pair cable or shielded cable
Operating System
Supports Windows98, Win7, Linux and Mac OS
Dimensions
62x33x19 mm
Environmental Conditions
Ambient/Storage Temperature
-40...85 ºC
Relative Humidity
5...95 RH%
Technical Specification
USB
USB 1.1 ve USB 2.0 standartlarına uygun
Standards
For RS-485/422, it is available TIA/EIA standards
USB Signal Inputs
VCC, DATA +, DATA -, GND, FG
RS-485 Signal Outputs
T/R+, T/R-, GND
RS-422 Signal Outputs
TXD+, TXD-, RXD+, RXD-, GND
Working Mode
Asynchronous working, point-to-point or point-to-multipoint 2 wires (half dublex) 4 wires (full dublex)
Direction Control
Data-flow direction is controlled automatically
Transmission Rate
300-921,600bps (Automatically detect the serial port signal rate)
Load Capability
Support point-to-multipoint transmission. (Each converter can connect 32 RS-422 or RS-485 interface equipment)
Transmission Distance
RS 485/422: 1.2km (921,600bps-300bps) USB port için: Max. 5mt
ESD (Electro-Static Discharge)
±15KV
Interface Protection
600W/ms
Interface Form
USB port: A Type male interface RS 485/422 port: 5-pin connection pole
Signal Indication
Power LED display (PWR), receive LED display (RXD), send LED display (TXD)
Transmission Media
Twisted-pair cable or shielded cable
Operating System
Supports Windows98, Win7, Linux and Mac OS
Dimensions
62x33x19 mm