EPAC3-W-F
Control with phase angle technology
4A AC or 15A AC load current
Selectable 110V AC or 220V AC load voltage
Selectable 50Hz or 100Hz vibration frequency
Phase angle can be controlled by adjustment knob or 0-10V DC analog signal
Load output can be stopped with digital input
Selectable digital input (for NO/NC contact or NO/NC sensor)
Power cable with plug and motor connection cable included
Connection cable for digital input
Maximum and minimum value can be assigned to output
Internal fuse
4 digits LED indicator
Soft Start feature
Varistor protection for voltage peaks
On/Off Power switch
CE marked according to European Norms
Manuals
| Environmental Conditions | |
| Ambient/Storage Temperature | 0...50 ºC / -25...60 ºC |
| Relative Humidity | 80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C |
| Protection Degree | According to EN 60529 IP20 |
| Height | Max. 2000m |
| Input | |
| Supply | 90-250V AC, 50/60Hz, 600VA |
| Digital Input | Load output stopping method can be selected from program (NO/NC contact or NO/NC sensor) Internal 12V DC output or an external 10-30V DC supply can be used |
| Insulation Voltage | 2500 Vrms 1 minute between input and output terminals |
| External Connections | Plug-in terminals |
| Output | |
| Load Current, AC51/25°C (Arms) | 4A AC or 15A AC |
| Load Voltage (Vrms) | 110V AC or 220V AC, selectable by (JP1) jumper |
| Vibration Frequency | 50/60Hz or 100/120Hz, selectable by (JP1) jumper |
| Overload Current t=1s/25°C (Arms) | 150 |
| Nonrecurrent Surge Current/25°C (Arms) | 400 |
| Voltage Drop in Transmission (Vrms) | 1,6 |
| Leakage Current (mArms) | 5 |
| I²t Value for Fuse t=10ms (A²s) | 880 |
| Frequency (Hz) | 50-60 |
| Power Factor (CosØ) | >0,75 |
| Minimum Operating Current (mArms) | 160 |
| Control | |
| Control Type | Phase angle controlled by using adjustment knob or 0-10V DC analog input signal |
| Housing | |
| Mounting Method | Wall mounting |
| Dimensions | W80xH160xD55 mm |
| Weight | Approx. 350g (After packing) |
| Enclosure Material | Self extinguishing plastics |