ETM2432
  • Dual contact output for timing control

  • External start, reset, and gate inputs

  • Hours - minutes and minutes - seconds indications can be selected

  • Scale 0:01min....99:59min, 0:01h....99:59h

  • Time increasing and decrement steps can be adjusted

  • Counting in downward direction

  • Start and stop process can be controlled by the front panel

  • 8 different warning tones

  • Upper and lower limits can be adjusted to set point value

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +%10 -%20 or 24V AC ±%10, 50/60Hz or 9-30V DC / 7-24V AC ±%10 SMPS
Power Consumption7VA
External ConnectionsScrew-terminals
ScaleSelectable 99:59 min or h
Sensitivity1s
Time Accuracy±1%
Inputs
Start InputMechanical contact (min. 50ms)
Gate InputMechanical contact (min.50ms)
Reset InputMechanical contact (min. 50ms)
Outputs
Control Output OUT1, OUT22 Relays: 250V AC, 8A (for resistive load), NO+NC
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load)
Housing
Mounting MethodPanel mounting
DimensionsW77xH35xD61 mm
WeightApprox. 198g (after packaging)
Enclosure MaterialSelf extinguishing plastics
Please choose your preferred language.