ATP4
  • Triggered by supply voltage

  • Triggering output (OUT1)

  • Contact output for timing function (OUT2)

  • 6 different timing modes for OUT2 (A, B, C, D, E, F)

  • 6 different timing unit for OUT2 (S, 10S, M, 10M, H, 10H)

  • 8/11 pin octal connector or 7/10 screw-terminal connection

  • Start, reset and gate inputs for 10 pins screw-terminal or 11 pin octal connector

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP50, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply90-250V AC, 50/60Hz or 24V AC ±10%, 50/60Hz or 24V DC ±10%
Power ConsumptionMax. 10VA
External Connections8/11 pin octal connector or 7/10 pins plug-in terminals
Scale0-1.2, 0-3, 0-12, 0-30 or 0-60
Reset Time0.3s for ATP4-UV, 0.01s for ATP4-LV
AccuracyMax. 0.2% fault depending on supply voltage
Max. 5% fault when setting set value
Max. 1% fault depending on temperature effect
Inputs
Start InputSwitch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms)
Reset InputSwitch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms)
Gate InputSwitch inputs for 10 screw-terminal or 11 pin octal connector models (Pulsing time min. 3ms)
Outputs
Trigger output OUT1Relay: 250V AC, 8A (resistive load), NC
Control output OUT2Relay: 250V AC, 8A (resistive load), NO+NC
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load)
Control Output StateOUT LED lit when control output is energized and flashes during timer operates
Control
Timing FunctionA, B, C, D, E, F modes can be selected
Timing Unitsecond, 10 seconds, minute, 10 minutes, hours and 10 hours on device
Housing
Mounting MethodPanel mounting or rail mounting with 8/11 pin octal connector
DimensionsW48xH48xD82 mm
WeightApprox. 100g (after packaging)
Enclosure MaterialSelf extinguishing plastics