ET5412
  • On-Off control

  • Relay output for cooling or heating control

  • Relay output for Alarm

  • Single NTC probe input

  • Offset value can be entered for NTC probe

  • In the case of probe failure, output state can be selected as On/Off or periodical running

  • Upper and lower limits of the setpoint can be adjusted

  • Upper and lower alarm limits can be adjusted depending on the set point value

  • Temperature unit can be selected as °C or °F

  • Communication feature via RS485 ModBus protocol(order option)

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +10% -20% 50/60Hz or 12/24V AC/DC ±10%
Power Consumption5VA
External ConnectionsScrew-terminals
Scale-60.0...150.0 °C
Sensitivity0.1°C (selectable 0.1 ºC or 1 ºC)
Accuracy± 1% (of full scale)
Output
Relay250V AC, 8A (for resistive load), NO+NC
1/2hp 240V AC (for inductive load)
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load)
Control
Control TypeSingle set-point and alarm control
Control AlgorithmOn-Off
HysteresisAdjustable between 1 and 20.0 °C
Housing
Mounting MethodTH35 rail mounting
DimensionsW54xH94xD68 mm
WeightApprox. 190g (after packaging)
Enclosure MaterialSelf extinguishing plastics