ET4403
  • 14.2 mm Led display

  • Pt-100 input

  • Limit or On/Off control selection

  • PV and SV indicators can be set to On or Off state

  • C1 Limit output contacts

  • Zero point input shift

  • External Reset input

  • Reset Key

  • In case of probe failure, C1 output is Off

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +10% -20% or 24V AC ±10%, 50/60Hz or 9-30V DC / 7-24V AC ±10% SMPS
Power Consumption5VA
External ConnectionsPlug-in terminals
Scale0...700 °C
Accuracy±1% (of full scale) ±1 digit
Line ResistanceMax. 100ohm
Input
Reset InputContact input can be used to set C1 output to initial position (Min. pulse duration must be 260ms)
Output
C1 OutputRelay : 250V AC, 2A (for resistive load), NO
SSR Output12V, 20mA
Electrical LifeMechanical 5.000.000 operations (under no load), Electrical 200.000 operations (2A at 250V AC, resistive load)
Control
Control TypeSingle set-point
Control AlgorithmOn-Off
A/D converter12 bit
Sampling time100ms
HysteresisAdjustable between 1 °C and 50 °C
Housing
MountingPanel mounting
DimensionsW48xH48xD53 mm
WeightApprox. 230g (after packaging)
Enclosure materialSelf extinguishing plastics
Looks like you don't speak Turkish. Would you like to view this content in English? Yes, please No