• Digital display for measured temperature and set value

  • Selectable On-Off or time proportional control

  • Fe-Const thermocouple or NiCr-Ni thermocouple input

  • In the case of sensor failure, control output will be disable

  • Easy setting procedure

  • CE marked according to European Norms


Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C
Protection DegreeAccording to EN 60529 Front panel: IP60, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +%10 -%20 or 24V AC ±%10, 50/60Hz or 9-30V DC / 7-24V AC ±%10 SMPS
Power Consumption5VA
External ConnectionsPlug-in terminals
ScaleFe-Const (J) thermocouple 0...400 °C
NiCr-Ni (K) thermocouple 0...320 °C
Sensitivity1 ºC
AccuracyFor analog scale ±4% (of full scale)", for display scale ±0,5% (of full scale) or ±1 digit
Control OutputRelay: 250V AC, 8A (for resistive load), NO+NC or 12V DC 20mA logic output
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 300.000 operations (3A at 250V AC, resistive load)
Control TypeSingle-setpoint control
Control AlgorithmOn-Off (Xp=0) or time proportional control
A/D converter10 bit
Proportional Band2% (adjustable from the device)
Hysteresis4 ºC (for On-Off control)
Mounting MethodPanel mounting
DimensionsW96xH96xD50 mm
WeightApprox. 250g (after packaging)
Enclosure MaterialSelf extinguishing plastics
Looks like you don't speak Turkish. Would you like to view this content in English? Yes, please No