• Control with phase angle technology

  • 4A AC load current

  • 0-125V AC load voltage

  • Phase angle can be controlled by adjustment knob or 0-10V DC analog signal

  • Load output can be stopped with digital input

  • Selectable digital input (for NO/NC contact or NO/NC sensor)

  • Power cable with plug and motor connection cable included

  • Connection cable for digital input (order option)

  • Maximum and minimum value can be assigned to output

  • Internal fuse

  • 4 Digits LED indicator

  • Control by phase angle

  • Soft Start feature

  • Varistor protection for voltage peaks

  • On/Off Power switch

  • CE marked according to European Norms


Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...60 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 IP20
HeightMax. 2000m
Supply90-250V AC, 50/60Hz, 600VA
Digital InputLoad output stopping method can be selected from program (NO/NC contact or NO/NC sensor)
Internal 12V DC output or an external 10-30V DC supply can be used
Insulation Voltage2500 Vrms 1 minute between input and output terminals
External ConnectionsPlug-in terminals
Load Current, AC51/25°C (Arms)4A AC
Load Voltage (Vrms)0-125V AC
Overload Current t=1s/25°C (Arms)150
Nonrecurrent Surge Current/25°C (Arms)400
Voltage Drop in Transmission (Vrms)1,6
Leakage Current (mArms)5
I²t Value for Fuse t=10ms (A²s)880
Frequency (Hz) (Hz)50-60
Power Factor (CosØ)>0,75
Minimum Operating Current (mArms)160
Control TypePhase angle controlled by using adjustment knob or 0-10V DC analog input signal
Mounting MethodWall mounting
DimensionsW80xH160xD55 mm
WeightApprox. 350g (After packing)
Enclosure MaterialSelf extinguishing plastics
Looks like you don't speak Turkish. Would you like to view this content in English? Yes, please No