EPAC-W-F
  • Control with phase angle technology

  • 4A AC load current

  • 0-220V AC load voltage

  • Selectable 50Hz or 100Hz vibration frequency

  • Phase angle can be controlled by adjustment knob or 0-10V DC analog signal

  • Load output can be stopped with digital input

  • Selectable digital input (for NO/NC contact or NO/NC sensor)

  • Power cable with plug and motor connection cable included

  • Maximum and minimum value can be assigned to output

  • Internal fuse

  • 4 digits LED indicator

  • Soft Start feature

  • Varistor protection for voltage peaks

  • On/Off Power switch

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...60 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 IP20
HeightMax. 2000m
Input
Supply90-250V AC, 50/60Hz, 600VA
Digital InputLoad output stopping method can be selected from program (NO/NC contact or NO/NC sensor)
Internal 12V DC output or an external 10-30V DC supply can be used
Insulation Voltage2500 Vrms 1 minute between input and output terminals
External ConnectionsPlug-in terminals
Output
Load Current, AC51/25°C (Arms)4A AC
Load Voltage (Vrms)0-220V AC
Vibration Frequency50/60Hz or 100/120Hz, selectable by (JP1) jumper
Overload Current t=1s/25°C (Arms)150
Nonrecurrent Surge Current/25°C (Arms)400
Voltage Drop in Transmission (Vrms)1,6
Leakage Current (mArms)5
I²t Value for Fuse t=10ms (A²s)880
Frequency (Hz)50-60
Power Factor (CosØ)>0,75
Minimum Operating Current (mArms)160
Control
Control TypePhase angle controlled by using adjustment knob or 0-10V DC analog input signal
Housing
Mounting MethodWall mounting
DimensionsW80xH160xD55 mm
WeightApprox. 350g (After packing)
Enclosure MaterialSelf extinguishing plastics