ET2413K
  • On-Off control

  • Relay output for heating control

  • NTC probe input

  • Offset for NTC probe input

  • Lower and Upper limit for adjusting set value

  • Adjustable rotation duration and range

  • Adjustable humidification duration and range

  • Temperature indication °F or °C

  • Parameter can be transferred by using “ENDAKEY” without connecting the device to supply

  • Communication feature via RS485 ModBus protocol (order option)

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +10% -20% 50/60Hz or 12/24V AC/DC ±10%
Power Consumption5VA
External ConnectionsScrew-terminals
Scale-60.0...150.0 °C
Sensitivity0.1 °C (selectable 0.1 ºC or 1 ºC)
Accuracy±1 °C
Time Accuracy±1%
Output
Heat OutputRelay: 250V AC, 8A (for resistive load), NO+NC, 1/2HP, 240V AC (inductive load)
Rotate(R) and (L) OutputRelay: 250V AC, 10A (for resistive load), NO, 1/2hp 240V AC (inductive load)
Humidity OutputRelay: 250V AC, 8A ( for resistive load), NO, 1/2HP, 240V AC (inductive load)
Life ExpectancyMechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load)
Control
Control TypeSingle set-point, pump and heater control
Control AlgorithmOn-Off
HysteresisAdjustable between 1...20.0 °C
Housing
Mounting MethodPanel mounting
DimensionsW77xH35xD61 mm
WeightApprox. 190g (after packaging)
Enclosure MaterialSelf extinguishing plastics