EMTC2412
  • On-Off control

  • Two relay output can be selected for cooling and agitating

  • Single NTC prob input

  • Compressor protection parameters can be set

  • In case of probe failure, input status can be set to On, off or periodic

  • Upper and lower set point limits can be adjusted

  • Agitation ON and OFF duration can be adjusted

  • Lower and upper alarm limit can be adjusted to depending on set value

  • °F or °C temperature unit selection

  • External alarm function can be configured to digital inputs

  • Transfer device parameter settings with ENDA key no power-up required (order option)

  • RS485 ModBus protocol communication feature (order option)

  • CE marked according to European Norms

Manuals

Environmental Conditions
Ambient/Storage Temperature0...50 ºC / -25...70 ºC
Relative Humidity80% relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at 40 °C
Protection DegreeAccording to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Supply230V AC +10% -20% 50/60Hz or 12/24V AC/DC ±10%
Power Consumption5VA
External ConnectionsScrew-terminals
Scale-60.0...150.0 °C
Sensitivity0.1 °C (selectable 0.1 ºC or 1 ºC)
Accuracy±1 °C
Time Accuracy±1%
Output
Compressor OutputRelay: 277V AC, 20A (for resistive load), NO, 2hp, 1.49kW 250V AC (inductive load)
Agitating OutputRelay: 250V AC, 8A (for resistive load), NO+NC, 1/2hp, 0.37kW 240V AC (inductive load)
Life ExpectancyCompressor Relay: Mechanical 10.000.000 operations (under no load), Electrical 100.000 operations (20A at 277V AC, resistive load)
Agitating Relay: Mechanical 30.000.000 operations (under no load), Electrical 100.000 operations (8A at 250V AC, resistive load)
Control
Control TypeSingle set-point
Control AlgorithmOn-Off
HysteresisAdjustable between 1...20.0 °C
Housing
Mounting MethodPanel mounting
DimensionsW77xH35xD61 mm
WeightApprox. 190g (after packaging)
Enclosure MaterialSelf extinguishing plastics